❏
Dynamic VLAN Creation — Indicates if Dynamic VLAN creation is enabled on the
interface. The possible field values are:
◆
Enabled — Enables Dynamic VLAN creation on the interface.
◆
Disabled — Disables Dynamic VLAN creation on the interface.
❏
GVRP Registration — Indicates if VLAN registration through GVRP is enabled on the
device. The possible field values are:
◆
Enabled — Enables GVRP registration on the device.
◆
Disabled — Disables GVRP registration on the device.
2. Define the GVRP Global Status field.
3. Click
To modify GVRP parameters:
1. Click Layer 2 > VLAN > GVRP Parameters. The GVRP Parameters page opens.
2. Click
GVRP Parameters Settings
3. Modify the GVRP State, Dynamic VLAN Creation, and GVRP Registration fields.
4. Click
Embedded Web System User Guide
.
. The GVRP Parameters Settings page opens:
. The GVRP Interface parameters are sent, and the device is updated.
www.hp.com
Configuring Interfaces
6-19