HP Blade bc1500 User Manual page 41

RADIUS
The RADIUS page contains the following fields:
❏
Default Retries — Defines the number of transmitted requests sent to the RADIUS
server before a failure occurs. Possible field values are 1-10. The default value is 3.
❏
Default Timeout for Reply — Defines the amount of time (in seconds) the device waits
for an answer from the RADIUS server before retrying the query, or switching to the
next server. Possible field values are 1-30. The default value is 3.
❏
Default Dead Time — Defines the default amount of time (in minutes) that a RADIUS
server is bypassed for service requests. The range is 0-2000. The default value is 0.
❏
Default Key String — Defines the default key string used for authenticating and
encrypting all RADIUS communications between the device and the RADIUS server.
This key must match the RADIUS encryption.
❏
Source IP Address — Defines the default IP address of a device accessing the RADIUS
server.
The RADIUS page also contains the following fields:
❏
IP Address — Lists the RADIUS server IP addresses.
❏
Priority — Displays the RADIUS server priority. The possible values are 1-65535,
where 1 is the highest value. The RADIUS server priority is used to configure the server
query order.
❏
Authentication Port — Identifies the authentication port. The authentication port is
used to verify the RADIUS server authentication. The authenticated port default is 1812.
❏
Number of Retries — Defines the number of transmitted requests sent to the RADIUS
server before a failure occurs. The possible field values are 1-10. The default value is 3.
❏
Timeout for Reply — Defines the amount of time (in seconds) the device waits for an
answer from the RADIUS server before retrying the query, or switching to the next
server. The possible field values are 1-30. The default value is 3.
Embedded Web System User Guide www.hp.com
Configuring Device Security
4-15