Configuring System Time
Defining SNTP Authentication
The SNTP Authentication page provides parameters for defining the means by which the SNTP
server is authenticated.
To define SNTP authentication:
1. Click System > Time > SNTP Authentication. The SNTP Authentication page opens:
SNTP Authentication
The SNTP Authentication page contains the following fields:
❏
Enable SNTP Authentication — Indicates if authenticating an SNTP session between
the device and an SNTP server is enabled on the device. The possible field values are:
◆
Checked — Authenticates SNTP sessions between the device and the SNTP server.
◆
Unchecked — Disables authenticating SNTP sessions between the device and the
SNTP server.
❏
Encryption Key ID — Indicates if the encryption key identification is used to
authenticate the SNTP server and the device. The field value is up to 4294967295.
❏
Authentication Key — Indicates the key used for authentication.
❏
Trusted Key — Indicates the encryption key used (Unicast/Anycast) or elected
(Broadcast) to authenticate the SNTP server.
2. Select the Enable SNTP Authentication field.
3. Click
3-8
. SNTP Authentication is defined, and the device is updated.
www.hp.com
Embedded Web System User Guide