Configuring Lag Parameters - HP Blade bc1500 User Manual

Configuring LAG Parameters

The LAG Configuration page contains fields for configuring parameters for LAGs. The device
supports up to eight ports per LAG and eight LAGs per system.
To define LAG parameters:
1. Click Layer 2 > Interface > LAG Configuration. The
LAG Configuration
The LAG Configuration page contains the following fields:
❏
Copy From Entry Number — Copies the LAG configuration parameters from the
selected interface.
❏
To Entry Number(s) — Copies the LAG configuration parameters to the defined
interface.
❏
LAG — Displays the LAG number.
❏
Description — Displays the user-defined LAG name and/or description.
❏
Type — Indicates the type of LAG defined by the first port assigned to the LAG. For
example, 100-Copper, or 100-Fiber.
❏
Status — Indicates if the LAG is currently linked. The possible field values are;
◆
Up — Indicates the LAG is currently linked, and is forwarding or receiving traffic.
◆
Down — Indicates the LAG is not currently linked, and is not forwarding or
receiving traffic.
❏
Speed — Displays the configured aggregated rate for the LAG. The possible field values
are:
◆
10 — Indicates the port is currently operating at 10 Mbps.
◆
100 — Indicates the port is currently operating at 100 Mbps.
◆
1000 — Indicates the port is currently operating at 1000 Mbps.
Embedded Web System User Guide
LAG Configuration
www.hp.com
Configuring Interfaces
page opens:
6-5