Configuring Lacp Parameters - HP Blade bc1500 User Manual

Configuring LACP Parameters

LAG ports can contain different media types if the ports are operating at the same speed.
Aggregated links can be set up manually or can be automatically established by enabling LACP
on the relevant links. Aggregate ports can be linked into link-aggregation port groups. Each
group is comprised of ports with the same speed. The LACP Parameters page contains fields for
configuring LACP for LAGs.
To configure LACP for LAGs:
1. Click Layer 2 > Interface > LACP Parameters. The LACP Parameters page opens:
LACP Parameters
The LACP Parameters page contains the following fields:
❏
LACP System Priority — Specifies system priority value. The field range is 1-65535.
The field default is 1.
❏
Port — Displays the port number to which timeout and priority values are assigned.
❏
Port-Priority — Displays the LACP priority value for the port. The field range is
1-65535.
❏
LACP Timeout — Displays the administrative LACP timeout.
Embedded Web System User Guide www.hp.com
Configuring Interfaces
6-9