HP Blade bc1500 User Manual page 38

Configuring Device Security
The TACACS+ default parameters are user-assigned defaults. The default settings are applied to
newly defined TACACS+ servers. If default values are not defined, the system defaults are
applied to the new TACACS+ servers.
To define TACACS+ authentication settings:
1. Click Management Security > Authentication > TACACS+. The TACACS+ page opens:
TACACS+
✎
This image may not contain all possible fields for this page. The complete list is provided in the
following bullets.
The Default Parameters section contains the following fields:
❏
Source IP Address — Defines the default device source IP address used for the
TACACS+ session between the device and the TACACS+ server.
❏
Key String — Defines the default authentication and encryption key for TACACS+
communication between the device and the TACACS+ server. This key must match the
encryption used on the TACACS+ server.
❏
Timeout for Reply — Defines the amount of time in seconds that passes before the
connection between the device and the TACACS+ times out. The field range is 1-30
seconds.
The TACACS+ page also contains the following fields:
❏
Host IP Address — Defines the TACACS+ Server IP address.
❏
Priority — Defines the order in which the TACACS+ servers are used. The field range is
0-65535. The default is 0.
❏
Source IP Address — Defines the device source IP address used for the TACACS+
session between the device and the TACACS+ server.
❏
Authentication Port — Defines the port number on which the TACACS+ session
occurs. The default port is 49.
4-12 www.hp.com Embedded Web System User Guide