HP Blade bc1500 User Manual page 132

Configuring Multicast Forwarding
❏
LAGs — Displays the LAGs that can be added to a Multicast service.
The following table contains the IGMP port and LAG members management settings:
IGMP Port/LAG Members Table Control Settings
Port Control
D
S
F
Blank
2. Click
Add Multicast Group
3. Define the VLAN ID, Bridge Multicast IP Address, and Bridge Multicast MAC Address
fields.
4. Select ports to join the Multicast group.
5. Define the Multicast port settings.
6. Click
10-4
Definition
Dynamically joins ports/LAG to the Multicast group in the Current Row.
Attaches the port to the Multicast group as a static member in the Static Row.
The port/LAG has joined the Multicast group statically in the Current Row.
Forbidden ports are not included the Multicast group, even if IGMP
snooping designated the port to join a Multicast group.
The port is not attached to a Multicast group.
. The Add Multicast Group page opens:
. The Multicast group is defined, and the device is updated.
www.hp.com Embedded Web System User Guide