HP Blade bc1500 User Manual page 81

❏
Flow Control — Displays the flow control status on the port. Operates when the port is
in full duplex mode.
❏
MDI/MDIX — Displays the MDI/MDIX status on the port. Hubs and switches are
deliberately wired opposite from the way that end stations are wired, so that when a hub
or switch is connected to an end station, a straight through Ethernet cable can be used,
and the pairs are matched up properly. When two hubs or switches are connected to each
other, or two end stations are connected to each other, a crossover cable is used to ensure
that the correct pairs are connected.
The possible field values are:
◆
Auto — Used to automatically detect the cable type.
◆
MDI (Media Dependent Interface) — Used for end stations.
◆
MDIX (Media Dependent Interface with Crossover) — Used for hubs and
switches.
❏
LAG — Indicates whether the port is part of a Link Aggregation Group (LAG).
2. Click
Port Configuration Settings
In addition to the fields in the Port Configuration page, the Port Configuration Settings page
includes the following field:
❏
Reactivate Suspended Port — Indicates whether the port is suspended or activated.
3. Check the Reactivate Suspended Port field to reactivate a suspended port.
Embedded Web System User Guide
. The Port Configuration Settings page opens:
www.hp.com
Configuring Interfaces
6-3