Viewing Etherlike Statistics - HP Blade bc1500 User Manual

Viewing Etherlike Statistics

The Etherlike page contains interface statistics. To view Etherlike Statistics:
1. Click Statistics/RMON > Interface Statistics > Etherlike. The Etherlike page opens:
Etherlike
The Etherlike page contains the following fields:
❏
Interface — Indicates the device for which statistics are displayed. The possible field
values are:
◆
Port — Defines the specific port for which Etherlike statistics are displayed.
◆
LAG — Defines the specific LAG for which Etherlike statistics are displayed.
❏
Refresh Rate — Defines the amount of time that passes before the interface statistics are
refreshed. The possible field values are:
◆
15 Sec — Indicates that the Etherlike statistics are refreshed every 15 seconds.
◆
30 Sec — Indicates that the Etherlike statistics are refreshed every 30 seconds.
◆
60 Sec — Indicates that the Etherlike statistics are refreshed every 60 seconds.
◆
No Refresh — Indicates that the Etherlike statistics are not refreshed.
❏
Frame Check Sequence (FCS) Errors — Displays the number of FCS errors received
on the selected interface.
❏
Single Collision Frames — Displays the number of single collision frames received on
the selected interface.
❏
Late Collisions — Displays the number of late collision frames received on the selected
interface.
❏
Oversize Packets — Displays the number of oversized packet errors on the selected
interface.
Embedded Web System User Guide www.hp.com
Viewing Statistics
15-3