HP Blade bc1500 User Manual page 93

◆
Trunk — Indicates the port belongs to VLANs in which all ports are tagged, except
for one port that can be untagged.
❏
PVID — Assigns a VLAN ID to untagged packets. The possible values are 1-4094.
VLAN 4095 is defined as per standard industry practice as the Discard VLAN. Packets
classified as Discard VLAN are dropped.
❏
Frame Type — Specifies the packet type accepted on the port. The possible field values
are:
◆
Admit Tag Only — Only tagged packets are accepted on the port.
◆
Admit All — Both tagged and untagged packets are accepted on the port.
❏
Ingress Filtering — Indicates whether ingress filtering is enabled on the port. The
possible field values are:
◆
Enable — Enables ingress filtering on the device. Ingress filtering discards packets
that are defined to VLANs of which the specific port is not a member.
◆
Disable — Disables ingress filtering on the device.
❏
Reserved VLAN — Indicates the VLAN selected by the user to be the reserved VLAN
if not in use by the system.
2. Click
VLAN Interface Settings
3. Define the Port Interface, Port VLAN Mode, PVID, Frame Type, Ingress Filtering, and
Reserve VLAN for Internal Use fields.
4. Click
Embedded Web System User Guide
. The VLAN Interface Settings page opens:
. The VLAN interface settings are modified, and the device is updated.
www.hp.com
Configuring Interfaces
6-15