HP Blade bc1500 User Manual page 195

◆
LOG — Indicates there is not a saving mechanism for either the device or in the
management system. If the device is not reset, the entry remains in the Log Table.
◆
TRAP — Indicates that an SNMP trap is generated, and sent via the Trap
mechanism. The Trap can also be saved using the Trap mechanism.
◆
Both — Indicates that both the Log and Trap mechanism are used to report alarms.
❏
Falling Threshold — Displays the falling counter value that triggers the falling
threshold alarm. The falling threshold is graphically presented on top of the graph bars.
Each monitored variable is designated a color.
❏
Falling Event — Displays the mechanism in which the alarms are reported.
❏
Startup Alarm — Displays the trigger that activates the alarm generation. Rising is
defined by crossing the threshold from a low-value threshold to a higher-value threshold.
❏
Interval (sec) — Defines the alarm interval time in seconds.
❏
Owner — Displays the device or user that defined the alarm.
2. Click
RMON Alarm Settings
3. Define the Interface, Counter Name, Sample Type, Rising Threshold, Rising Event,
Falling Threshold, Falling Event, Startup Alarm, Interval, and Owner fields.
4. Click
Embedded Web System User Guide
. The RMON Alarm Settings page opens:
. The RMON alarm is added, and the device is updated.
www.hp.com
Viewing Statistics
15-13