Mapping Dscp Values To Queues - HP Blade bc1500 User Manual

Configuring Quality of Service

Mapping DSCP Values to Queues

The page contains fields for mapping DSCP settings to traffic queues. For example, a packet
with a DSCP tag value of 3 can be assigned to queue 2.
To map DSCP values to Queues:
1. Click QoS > General > DSCP to Queue.
DSCP to Queue
The page contains the following fields:
❏
DSCP In — Displays the incoming packet's DSCP value.
❏
Queue — Specifies the traffic forwarding queue to which the DSCP priority is mapped.
Eight traffic priority queues are supported.
2. Define the queue number in the Queue field next to the required DSCP value.
3. Click
13-8
. The DSCP value is mapped to a queue, and the device is updated.
www.hp.com Embedded Web System User Guide