NETGEAR FVS318 - ProSafe VPN Firewall Router Reference Manual page 98

Broadband prosafe vpn firewall
Hide thumbs Also See for FVS318 - ProSafe VPN Firewall Router:
Table of Contents

Advertisement

Reference Manual for the Model FVS318 Broadband ProSafe VPN Firewall
The Router Status menu provides a limited amount of status and usage information. From the
Main Menu of the browser interface, under Maintenance, select Router Status to view the status
screen, shown in
Figure
This screen shows the following parameters:
Table 7-1.
Menu 3.2 - Router Status Fields
Field
System Name
Firmware Version
WAN Port
MAC Address
IP Address
DHCP
IP Subnet Mask
Domain Name Servers
(DNS)
LAN Port
MAC Address
IP Address
IP Subnet Mask
DHCP
7-2
7-1.
Description
This field displays the Host Name assigned to the firewall in the Basic
Settings menu.
This field displays the firewall firmware version.
These parameters apply to the Internet (WAN) port of the firewall.
This field displays the Ethernet MAC address being used by the Internet
(WAN) port of the firewall.
This field displays the IP address being used by the Internet (WAN) port
of the firewall. If no address is shown, the firewall cannot connect to the
Internet.
If set to None, the firewall is configured to use a fixed IP address on the
WAN.
If set to Client, the firewall is configured to obtain an IP address
dynamically from the ISP
This field displays the IP Subnet Mask being used by the Internet (WAN)
port of the firewall.
This field displays the DNS Server IP addresses being used by the
firewall. These addresses are usually obtained dynamically from the ISP.
These parameters apply to the Local (WAN) port of the firewall.
This field displays the Ethernet MAC address being used by the Local
(LAN) port of the firewall.
This field displays the IP address being used by the Local (LAN) port of
the firewall. The default is 192.168.0.1
This field displays the IP Subnet Mask being used by the Local (LAN)
port of the firewall. The default is 255.255.255.0
If set to OFF, the firewall will not assign IP addresses to local PCs on the
LAN.
If set to ON, the firewall is configured to assign IP addresses to local
PCs on the LAN.
M-10146-01
Managing Your Network

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fvs318nFvs318na - prosafe vpn firewall recertified

Table of Contents