Reference Manual for the Model FVS318 Broadband ProSafe VPN Firewall
•
To edit an existing entry, select its button on the left side of the table and click Edit.
•
To delete an existing entry, select its button on the left side of the table and click Delete.
Modify the menu shown below for defining or editing a service.
3.
Figure 4-4: Add Services menu
The parameters are:
•
Service.
From this list, select the application or service to be allowed or blocked. The list already
displays many common services, but you are not limited to these choices. Use the Add
Services menu to add any additional services or applications that do not already appear.
•
Action.
Choose how you would like this type of traffic to be handled. Allow always is the default
and you can block always or choose to block or allow according to the schedule you have
defined in the Schedule menu.
•
LAN Users Address.
Specify traffic originating on the LAN (outbound), and choose whether you would like the
traffic to be restricted by source IP address. You can select Any, a Single address, or a
Range. If you select a range of addresses, enter the range in the start and finish boxes. If
you select a single address, enter it in the start box.
•
Log.
4-6
M-10146-01
Protecting Your Network