How To Configure A Remote Pc To Network Vpn - NETGEAR FVS318 - ProSafe VPN Firewall Router Reference Manual

Reference Manual for the Model FVS318 Broadband ProSafe VPN Firewall
This will cause a continuous ping to be sent to the first FVS318. After between several
c.
seconds and two minutes, the ping response should change from "timed out" to "reply."
Figure 6-11: Ping test results
At this point the connection is established. Now that your VPN connection is working,
whenever a PC on the second LAN needs to access an IP address on the first LAN, the
Firewalls will automatically establish the connection.

How to Configure a Remote PC to Network VPN

This procedure describes linking a remote PC and a LAN. The LAN will connect to the Internet
using an FVS318 with a fixed IP address. The PC can be connected to the Internet through dialup,
cable or DSL modem, or other means, and we will assume it has a dynamically assigned IP
address.
The PC must have a VPN client program that supports IPSec. NETGEAR recommends and
supports the SafeNet SoftRemote (or Soft-PK) Secure VPN Client for Windows. The SafeNet
VPN Client can be purchased from SafeNet at http://www.safenet-inc.com.
Note: If your situation is different, for example, if your remote PC is connected through a simple
cable/DSL router, or if you wish to use different VPN client software, please refer to NETGEAR's
web site for additional VPN applications information.
FVS318 A
192.168.3.1
Figure 6-12: Remote PC to Local LAN (A) configuration
6-16
VPN Tunnel
24.0.0.1
M-10146-01
Virtual Private Networking