NETGEAR FVS318 - ProSafe VPN Firewall Router Reference Manual page 81

The worksheet below identifies the parameters used in the procedure below. A blank worksheet is
at, "PC to Network IKE VPN Tunnel Settings Configuration Worksheet" on page
Table 6-2: PC to Network IKE VPN Tunnel Settings Configuration Worksheet
IKE Security Association Settings
Connection Name:
Pre-Shared Key:
Secure Association -- Main Mode, Aggressive Mode, or Manual Keys:
Perfect Forward Secrecy:
Encryption Protocol -- Null, DES, 3DES, or AES -128, -192, or -256:
Key Life in seconds:
IKE Life Time in seconds:
Network
Network: LAN A LANAPCIPSEC
Computer: PC
1. Configure the VPN Tunnel on the FVS318 on LAN A.
To configure the Firewall, follow these steps:
From the Setup Menu, click the VPN Settings link, then click Add to configure a new
a.
VPN tunnel. The VPN Settings - IKE window opens as shown below:
Virtual Private Networking
Reference Manual for the Model FVS318 Broadband ProSafe VPN Firewall
Local IPSec ID LAN IP Address
192.168.3.1
PCIPSEC 192.168.100.2
Subnet Mask
255.255.255.0
255.255.255.255
M-10146-01
6-32.
VPNLANPC
r>T(h4&3@#kB
Main
Enabled
DES
(1 hour)
3600
(8 hours)
28800
FQDN or Gateway IP
(WAN IP Address)
24.0.0.1
0.0.0.0
6-17