NETGEAR FVS318 - ProSafe VPN Firewall Router Reference Manual page 176

Reference Manual for the Model FVS318 Broadband ProSafe VPN Firewall
– From the Local Identity drop-down box, select WAN IP Address (WAN IP address will
automatically be populated into the Local Identity Data field after policy is applied).
– From the Remote Identity drop-down box, select Remote WAN IP (WAN IP address will
automatically be populated into the Local Identity Data field after policy is applied).
Figure E-5: NETGEAR FVL328 v1.4 IKE Policy Configuration – Part 2
– From the Encryption Algorithm drop-down box, select 3DES.
– From the Authentication Algorithm drop-down box, select MD5.
– From the Authentication Method radio button, select Pre-shared Key.
– In the Pre-Shared Key field, type hr5xb84l6aa9r6. You must make sure the key is the
same for both gateways.
– From the Diffie-Hellman (DH) Group drop-down box, select Group 1 (768 Bit).
– In the SA Life Time field, type 28800.
Click the Apply Button. This will bring you back to the IKE Policies Menu.
3.
Figure E-6: NETGEAR FVL328 v1.4 IKE Policies (Post Configuration)
The FVS318 IKE Policy is now displayed in the IKE Policies page.
E-6 NETGEAR VPN Configuration of FVS318 or FVM318 to FVL328
M-10146-01