Verifying Tcp/Ip Properties For Windows Xp, 2000, And Nt4 - NETGEAR FVS318 - ProSafe VPN Firewall Router Reference Manual

Reference Manual for the Model FVS318 Broadband ProSafe VPN Firewall
• Highlight the TCP/IP Protocol in the
Network Protocols box, and click on the
Properties button.
• The TCP/IP Properties dialog box now
displays.
• Click the IP Address tab.
• Select the radio button marked Obtain an IP
address from a DHCP server.
• Click OK. This completes the configuration
of TCP/IP in Windows NT.
• Restart the PC.
Repeat these steps for each PC with this version
of Windows on your network.

Verifying TCP/IP Properties for Windows XP, 2000, and NT4

To check your PC's TCP/IP configuration:
C-14
M-10146-01
Preparing Your Network