How To Connect The Fvs318 Vpn Firewall - NETGEAR FVS318 - ProSafe VPN Firewall Router Reference Manual

Reference Manual for the Model FVS318 Broadband ProSafe VPN Firewall

How to Connect the FVS318 VPN Firewall

This section provides instructions for connecting the FVS318 Broadband ProSafe VPN Firewall
to your Local Area Network (LAN).
Note: The Resource CD included with your firewall contains an animated Installation Assistant to
help you through this procedure.
There are three steps to connecting your firewall:
Connect the firewall to your network
1.
Log in to the firewall
2.
Connect to the Internet
3.
Follow the steps below to connect your firewall to your network. You can also refer to the
Resource CD included with your firewall which contains an animated Installation Assistant to help
you through this procedure.
1. Connect the Firewall to Your LAN
Turn off your computer and Cable or DSL Modem.
a.
Disconnect the Ethernet cable (A) from your computer which connects to your Cable or
b.
DSL modem.
A
Figure 3-1: Disconnect the Cable or DSL Modem
3-4
DSL modem
M-10146-01
Connecting the Firewall to the Internet