Wizard-Detected Dynamic Ip Option - NETGEAR FVS318 - ProSafe VPN Firewall Router Reference Manual

Reference Manual for the Model FVS318 Broadband ProSafe VPN Firewall
If you enter an address here, after you finish configuring the firewall, reboot your PCs so that
the settings take effect.
Click on Apply to save your settings.
4.
Click on the Test button to test your Internet connection. If the NETGEAR website does not
5.
appear within one minute, refer to

Wizard-Detected Dynamic IP Option

If the Setup Wizard determines that your Internet service account uses Dynamic IP assignment,
you will be directed to the menu shown in
Figure 3-8: Setup Wizard menu for Dynamic IP address
Enter your Account Name (may also be called Host Name) and Domain Name. These
1.
parameters may be necessary to access your ISP's services such as mail or news servers. If you
leave the Domain Name field blank, the firewall will attempt to learn the domain
automatically from the ISP. If this is not successful, you may need to enter it manually.
If you know that your ISP does not automatically transmit DNS addresses to the firewall
2.
during login, select "Use these DNS servers" and enter the IP address of your ISP's Primary
DNS Server. If a Secondary DNS Server address is available, enter it also.
3-10
Chapter 8, Troubleshooting".
Figure 3-8 below:
Connecting the Firewall to the Internet
M-10146-01