Garmin G1000:Socata Pilot's Manual page 411

CHANGING THE SELECTED COURSE
If the navigation source is VOR or localizer or OBS Mode has been enabled when using GPS, the Selected
Course is controlled using the CRS Knob corresponding to the selected flight director (CRS1 for the pilot
side, CRS2 for the copilot side).
Pressing the CWS Button and hand-flying the aircraft does not change the Selected Course while in
Navigation Mode. The autopilot guides the aircraft back to the Selected Course (or GPS flight plan) when the
CWS Button is released.
Command Bars
Indicate Left
Turn to Track
GPS Course and
Climb to Intercept
Selected Altitude
GPS is
Selected
Navigation
Source
190-00709-00 Rev. A
GPS Navigation
Mode Active
Figure 7-28 Navigation Mode
Garmin G1000 Pilot's Guide for the Socata TBM 850
AUTOMATIC FLIGHT CONTROL SYSTEM
Pitch Hold
Mode Active
7-27