Garmin G1000:Socata Pilot's Manual page 512

APPENDIX A
MISCELLANEOUS MESSAGE ADVISORIES (CONT.)
Message
PTK FAIL – Parallel track unavailable:
invalid leg type.
PTK FAIL – Parallel track unavailable:
past IAF.
UNABLE V WPT – Can't reach current
vertical waypoint.
VNV – Unavailable. Unsupported leg
type in flight plan.
VNV – Unavailable. Excessive track
angle error.
VNV – Unavailable. Excessive
crosstrack error.
VNV – Unavailable. Parallel course
selected.
NO WGS84 WPT – Non WGS 84
waypoint for navigation -[xxxx]
TRAFFIC FAIL – Traffic device has
failed.
STRMSCP FAIL – Stormscope has
failed.
FAILED PATH – A data path has failed. A data path connected to the GDU or the GIA 63/W has failed.
MAG VAR WARN – Large magnetic
variance. Verify all course angles.
SCHEDULER [#] – <message>.
ECS – Service required.
CRUISE I – Cruise I conditions met.
CRUISE II – Cruise II conditions met.
EXCEEDANCE – Engine exceedance
data is being logged.
A-18
Comments
Invalid leg type for parallel offset.
IAF waypoint for parallel offset has been passed.
The current vertical waypoint can not be reached within the maximum flight path
angle and vertical speed constraints. The system automatically transitions to the next
vertical waypoint.
The lateral flight plan contains a procedure turn, vector, or other unsupported leg
type prior to the active vertical waypoint. This prevents vertical guidance to the active
vertical waypoint.
The current track angle error exceeds the limit, causing the vertical deviation to go
invalid.
The current crosstrack exceeds the limit, causing vertical deviation to go invalid.
A parallel course has been selected, causing the vertical deviation to go invalid.
The selected waypoint [xxxx] does not use the WGS 84 datum. Cross-check position
with alternate navigation sources.
The G1000 is no longer receiving data from the traffic system. The traffic device
should be serviced.
Stormscope has failed. The G1000 system should be serviced.
The GDU's internal model cannot determine the exact magnetic variance for
geographic locations near the magnetic poles. Displayed magnetic course angles may
differ from the actual magnetic heading by more than 2°.
Message criteria entered by the user.
The environmental control system has failed.
Cruise I engine trend data log has been captured.
Cruise II engine trend data log has been captured.
An engine exceedance log has been captured.
Garmin G1000 Pilot's Guide for the Socata TBM 850 190-00709-00 Rev. A