Vertical Navigation (Vnv) Indications - Garmin G1000:Socata Pilot's Manual

VERTICAL NAVIGATION (VNV) INDICATIONS

When a VNV flight plan has been activated, VNV indications (VNV Target Altitude, RVSI, VDI) appear on the
PFD in conjunction with the "TOD within 1 minute" message and "Vertical track" voice alert. See the Flight
Management and AFCS sections for details on VNV features. VNV indications are removed from the PFD
according to the criteria listed in Table 2-3.
GPS is
Selected
Navigation
Source
Aircraft > 1 min before the next TOD and not on a descent leg
Aircraft > 1 min before the next TOD due to flight plan change
VNV cancelled (CNCL VNV Softkey pressed on MFD)
Distance to active waypoint cannot be computed due to
unsupported flight plan leg type (see Flight Management
Section)
Aircraft > 250 feet below active VNV Target Altitude
Current crosstrack or track angle error has exceeded limit
Active altitude-constrained waypoint can not be reached within
maximum allowed flight path angle and vertical speed
Last altitude-constrained waypoint in active flight plan reached
190-00709-00 Rev. A
Figure 2-42 Vertical Navigation Indications (PFD)
Criteria
Table 2-3 VNV Indication Removal Criteria
Garmin G1000 Pilot's Guide for the Socata TBM 850
Top of Descent Message
VNV Indication Removed
Required Vertical Vertical
Speed (RVSI) Deviation (VDI)
X
X
X
X
X
X
X
X
(30 sec before)
FLIGHT INSTRUMENTS
VNV Target
Altitude
Vertical
Deviation
Indicator
Required
Vertical
Speed Bug
Enroute
Phase of
Flight
VNV Target
Altitude*
X X
X X
X X
X X
X X
X X
X
X
X
2-29