Garmin G1000:Socata Pilot's Manual page 75

If the same VOR/LOC navigation source is selected on both PFDs, the navigation source annunciation turns
yellow on both displays (unless synchronized). Once the CDIs are synchronized (CDI SYNC turned on), they
remain synchronized for the entire flight.
Synchronizing the CDIs:
1) Select the AUX - System Setup Page using the FMS Knob.
2) Press the FMS Knob to activate the cursor. 'Time Format' is highlighted.
3) Turn the large FMS Knob to highlight the 'CDI Sync' ON/OFF field.
4) Turn the small FMS Knob clockwise to ON or counterclockwise to OFF.
5) Press the FMS Knob to remove the cursor.
190-00709-00 Rev. A
Figure 2-33 CDI Sync Setting
(System Setup Page)
Garmin G1000 Pilot's Guide for the Socata TBM 850
FLIGHT INSTRUMENTS
2-21