Garmin G1000:Socata Pilot's Manual page 359

Terrain data can be selected for display independently of obstacle data; however, obstacles recognized by
Terrain Proximity as yellow or red are shown when terrain is selected for display and the map range is within
the setting limit.
Maps besides the Terrain Proximity Page use settings based on those selected for the Navigation Map Page.
The maximum display ranges for obstacles on each map are dependent on the range setting made for the
Navigation Map. If the maximum range for obstacle display on the Navigation Map is adjusted to below 20 nm,
the highest obstacle display range settings on the other applicable maps are also adjusted proportionally.
Customizing terrain and obstacle display on the Navigation Map Page:
1) Select the Navigation Map Page.
2) Press the MENU Key.
3) With 'Map Setup' highlighted, press the ENT Key (Figure 6-64).
4) Turn the small FMS Knob to select the 'Map' Group and press the ENT Key (Figure 6-65).
5) Turn the large FMS Knob or press the ENT Key to scroll though product selections (Figure 6-66).
• TERRAIN DATA – Turns the display of terrain data on or off and sets maximum range at which terrain is shown
• OBSTACLE DATA – Turns the display of obstacle data on or off and sets maximum range at which obstacles are shown
6) Turn the small FMS Knob to scroll though options for each product (ON/OFF, range settings).
7) Press the ENT Key to select an option.
8) Press the FMS Knob or CLR Key to return to the Navigation Map Page with the changed settings.
Figure 6-64 Navigation Map Page Menu
Figure 6-65 Navigation Map Page Setup Menu
190-00709-00 Rev. A
Figure 6-66 Navigation Map Page Setup Menu, Map Group
Garmin G1000 Pilot's Guide for the Socata TBM 850
HAZARD AVOIDANCE
6-59