Specifications - Denon AVR-2807 Operating Instructions Manual

Troubleshooting
Symptom Cause
"NO SIGNAL" is • The signal cannot be received.
displayed in the XM
mode.
• The selected channel is not
"OFF AIR" is displayed
currently broadcasting.
in the XM mode.
Receiving only XM • The XM Tuner is not activated.
channels 0 and 1.

Specifications

2 Audio section
• Power amplifier
Rated output:
Dynamic power:
Output terminals:
• Analog
Input sensitivity / input impedance:
Frequency response:
S/N:
Distortion:
Rated output:
• Digital
D/A output:
Digital input:
• Phono equalizer (PHONO input — REC OUT)
Input sensitivity:
RIAA deviation:
S/N:
Rated output / Maximum output:
Distortion factor:
Measures
• Reposition your XM Connect-and-
Play antenna.
• Select the another channel.
• Contact XM Radio.
Front (A, B):
110 W + 110 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
140 W + 140 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Center:
110 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
140 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround:
110 W + 110 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
140 W + 140 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround Back:
110 W + 110 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
140 W + 140 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
120 W x 2 ch (8 Ω/ohms)
170 W x 2 ch (4 Ω/ohms)
Front: A or B 6 ~ 16 Ω/ohms
A + B 8 ~ 16 Ω/ohms
Center, Surround, Surr. Back 6 ~ 16 Ω/ohms
200 mV / 47 kΩ/kohms
10 Hz ~ 100 kHz: +0, –3 dB (DIRECT mode)
102 dB (DIRECT mode)
0.005% (20 Hz ~ 20 kHz) (DIRECT mode)
1.2 V
Rated output — 2 V (at 0 dB playback)
Total harmonic distortion — 0.008 % (1 kHz, at 0 dB)
S/N ratio — 102 dB
Dynamic range — 96 dB
Format — Digital audio interface
2.5 mV
±1 dB (20 Hz to 20 kHz)
74 dB (A weighting, with 5 mV input)
150 mV / 8 V
0.03% (1 kHz, 3 V)
Page
37
37
37
2 Video section
• Standard video terminals
Input / output level and impedance:
Frequency response:
• S-Video terminals
Input / output level and impedance:
Frequency response:
• Color component video terminal
Input / output level and impedance:
Frequency response:
2 Tuner section
Receiving Range:
Usable Sensitivity:
50 dB Quieting Sensitivity:
S/N (IHF-A):
Total Harmonic Distortion (at 1 kHz):
2 General
Power supply:
Power consumption:
Maximum external dimensions:
Mass:
2 Remote control unit (RC-1030)
Batteries:
External dimensions:
Mass:
* For purposes of improvement, specifications and design are subject to change without notice.
70
1 Vp-p, 75 Ω/ohms
5 Hz ~ 10 MHz — +0, –3 dB
Y (brightness) signal — 1 Vp-p, 75 Ω/ohms
C (color) signal — 0.286 Vp-p, 75 Ω/ohms
5 Hz ~ 10 MHz — +0, –3 dB
Y (brightness) signal — 1 Vp-p, 75 Ω/ohms
P /C signal — 0.7 Vp-p, 75 Ω/ohms
B B
P /C signal — 0.7 Vp-p, 75 Ω/ohms
R R
5 Hz ~ 100 MHz — +0, –3 dB
[FM]
(note: µV at 75 Ω/ohms, 0 dBf = 1 x 10 –15 W)
87.5 MHz ~ 107.9 MHz
1.0 µV (11.2 dBf)
MONO 1.6 µV (15.3 dBf)
STEREO 23 µV (38.5 dBf)
MONO 77 dB
STEREO 72 dB
MONO 0.15%
STEREO 0.3%
AC 120 V, 60 Hz
6.0 A
1 W Max (Standby)
434 (W) x 171 (H) x 429 (D) mm (17-3/32" x 6-47/64" x 16-57/64")
14.0 kg (30 lbs 13.84 oz)
R6P/AA Type (3 batteries)
58 (W) x 230 (H) x 37 (D) mm (2-9/32" x 9-1/16" x 1-29/64")
230 g (Approx. 8.1 oz) (included batteries)
Specifications
[AM]
520 kHz ~ 1710 kHz
18 µV