Selecting The Dts Neo:6 Mode; Checking The Input Signals - Denon AVR-2807 Operating Instructions Manual

Basic Operation
ENTER SURROUND
STANDARD PARAMETER
D H F G
STANDARD
D H F G
[ON SCREEN]
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit

Selecting the DTS NEO:6 mode

It is possible to play analog input signals and digital input signals
(2-channels) in the surround mode.
1
STANDARD
Press
2
Play a program source.
3
SURROUND PARAMETER
Press
4
F F G G
Press
CINEMA:
This mode is optimum for playing movies. Decoding is
performed with emphasis on separation performance to
achieve the same atmosphere with 2-channel sources as with
6.1-channel sources.
MUSIC:
This mode is suited mainly for playing music.
5
When "MUSIC" is selected:
D D H H
Press
F F G G
to set.
CNTR. IMAGE:
The expansion of the center channel can be adjusted. (0.0 to
1.0, default : 0.3)
6
ENTER
Press
SURROUND
PARAMETER
ENTER
3
to select "DTS NEO:6".
II
DOLBY PL x DTS NEO:6
.
to select the play mode.
to select "CNTR. IMAGE" , then press
SURROUND PARAMETER
or .
5
(When "MUSIC" is selected)
28

Checking the input signals

1
[ON SCREEN]
Press .
Room EQ:
Displays the type of equalizer currently set.
SIGNAL:
Displays the type of input signal.
fs:
Displays the input signal's sampling frequency.
FORMAT:
Displays the input signal's number of channels (front /
surround / LFE on/off).
"SURROUND" is displayed for 2-channel signal sources
recorded in Dolby Surround.
OFFSET:
Displays the dialog normalization offset value.
FLAG:
"MATRIX" is displayed if the input signal has undergone
matrix processing, "DISCRETE" is displayed if the input signal
has undergone discrete processing.
2
[ON SCREEN]
Press again.
• OSD-1 : Input signal
OSD-2 : HDMI monitor information
OSD-3 : Input/output settings
OSD-4 : Auto surround mode
OSD-5 ~ 7 : USER MODE 1 ~ 3
OSD-8 ~ 14 : Tuner preset stations
1
Example: Dolby Digital
• "OSD-1" "FLAG" is not displayed if there is no FLAG
identification signal in the input signal.
• OSD-2:
The monitor's resolution is displayed when an HDMI monitor is
connected to the AVR-2807.
• OSD-4:
This is displayed when the auto surround mode is set to "ON"
( page 23) and the input mode is set to "AUTO".
It is not displayed when the input mode is set to "ANALOG" or
"EXT. IN".
Basic Operation
Example: DTS