The Analog Video To Hdmi Conversion Function - Denon AVR-2807 Operating Instructions Manual

Connecting Other Sources
S-VIDEO
Video convert
MONITOR OUT
HDMI COMPONENT
– E E
E E
–
– E E
Used E E
E E
Not used
– E E
E E
–
E E
–
Used E E
E E
Not used
OFF
– C C
– C C
C C
–
Used C C
Not used C C
C C
–
– C C
– C C
C C
Used
Not used C C
C C : Signal input
E E : No signal
Input signals
S-VIDEO VIDEO HDMI
E E E E E E E E
E E E E C C E E
E E C C E E E E
E E C C C C E E
E E C C C C E E
C C E E E E E E
C C E E C C E E
C C C C E E E E
C C C C C C E E
C C C C C C E E
E E E E E E
HDMI
E E E E C C HDMI
E E C C E E
HDMI
E E C C C C HDMI
E E C C C C HDMI
C C E E E E
HDMI
C C E E C C HDMI
C C C C E E HDMI
C C C C C C
HDMI
C C C C C C HDMI
E E
✳1
✳2
COMPONENT : On screen display only displayed for SYSTEM
HDMI
MONITOR OUT
COMPONENT S-VIDEO VIDEO
E E E E E E
E E E E
VIDEO
E E S-VIDEO E E
VIDEO
E E S-VIDEO
E E
– VIDEO
COMPONENT E E E E
COMPONENT ✳1
E E
VIDEO
COMPONENT ✳2
E E
S-VIDEO
COMPONENT ✳2
S-VIDEO VIDEO
COMPONENT ✳1
– VIDEO
E E E E E E
E E E E VIDEO
E E E E
S-VIDEO
E E S-VIDEO VIDEO
E E – VIDEO
E E E E
COMPONENT
COMPONENT ✳1
E E VIDEO
COMPONENT ✳2
S-VIDEO E E
COMPONENT ✳2
VIDEO
S-VIDEO
COMPONENT ✳1
– VIDEO
: Not output
: On screen display superimposed on video
signal and output.
: On screen display superimposed on S-Video
signal and output.
SETUP, SURROUND PARAMETER and ON SCREEN
buttons.
: The on screen display is displayed when the
"Analog to HDMI convert" is set to "ON".
15
The analog video to HDMI conversion
function
• The AVR-2807's video up-conversion function lets you output
analog video input signals (component – 480i/576i, 480p/576p,
✳2
1080i or 720p; S-Video and composite video – 480i/576i) to the
HDMI monitor output terminal.
• On the AVR-2807, it is possible to convert 480i/576i component
video, S-Video and composite video input signals to 480p/576p
format and output them from the HDMI monitor output
✳2
terminal.
• The resolutions with which the monitor is compatible can be
✳2
checked using the STATUS button on the main unit or the ON
SCREEN button on the remote control unit.
• It is not possible to down-convert from HDMI input signals to
the component, S-Video or composite video monitor output
terminals.
✳2
• If you do not want to use the function for converting analog
video signals to HDMI signals, select "OFF" for "Analog to
HDMI Convert" at "Setting the HDMI Out Setup"(
51).
• Video down conversion to the MAIN ZONE's monitor output is
only possible when the component video input resolution is
480i (interlaced standard definition video – NTSC format, for
North America) or 576i (interlaced standard definition video –
PAL format, for Europe and other countries).
• To set the video conversion function for the MAIN ZONE to
"OFF" ( page 50).
2 On screen display for component video outputs
and HDMI output
• When viewing component video signals or HDMI signals via
the AVR-2807, the on screen display is displayed on the monitor
when the "System Setup" operations are performed and when
the remote control unit's ON SCREEN button is operated.
• When only component video signals are input to the AVR-2807,
the characters of the on screen display are not displayed over
the picture.
Connecting Other Sources
page