Selecting The Dolby Digital And Dts Surround Mode (Only With Digital Input) - Denon AVR-2807 Operating Instructions Manual

Basic Operation
ENTER SURROUND
STANDARD PARAMETER
INPUT MODE <SURROUND BACK>
D H F G
STANDARD
D H F G
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
Selecting the Dolby Digital and DTS
<STATUS>
Surround mode (only with digital input)
1
Select an input source for which digital (COAXIAL,
OPTICAL etc.) is set (
2
INPUT MODE
Press
3
STANDARD
Press
4
Play a program source with the
mark.
• "
5
SURROUND PARAMETER
Press
The surround back channel can be switched on and off using
< SURROUND BACK > .
6 D D H H
Press
set.
CINEMA EQ.:
Use this if movie dialogues sound harsh to lower the treble
sound.
Effective source / mode
Dolby Pro Logic
DTS Surround / DTS NEO:6 / WIDE SCREEN
D.COMP.:
The dynamic range is compressed. Select one of 4 modes:
"OFF", "LOW", "MID" (middle) or "HI" (high).
Effective source / mode
SURROUND
PARAMETER
Dolby Digital /
DTS (For DTS sources, only displayed for compatible
ENTER
software.)
INPUT MODE
LFE:
To play the various types of software properly, we
recommend setting to the values shown below.
• To play Dolby Digital software: "0 dB"
• To play DTS movie software: "0 dB"
• To play DTS music software: "–10 dB"
page 47 or 49 ~ 50).
to select "AUTO".
to select "STANDARD".
,
" or " " lights, depending on the source.
.
F F G G
to select the item, then press
II
x / Dolby Pro Logic / Dolby Digital /
26
TONE:
Adjust the tone control.
Can be set in surround modes other than direct mode.
Can be set separately for the different surround modes.
(Adjusted together for the Dolby/DTS SURROUND
modes.)
SB CH OUT:
Select the play mode or surround back channel playback
method.
(1) For multi-channel sources
• SB OFF (OFF):
Not played.
• NON MTRX:
Surround channel signal played.
• MTRX ON:
Surround channel signal played with digital matrix processing.
• ES MTRX:
DTS signal played with digital matrix processing.
• ES DSCRT:
Signal included in DTS-ES discrete 6.1-channel sources
played.
II
to • PL x CINEMA:
II
Decoded in Dolby Pro Logic x Cinema mode, surround back
signal played.
Set the surround back speaker to "2spkrs" at "Speaker
Configuration" ( page 56, 57)
II
• PL x MUSIC:
II
Decoded in Dolby Pro Logic
signal played.
Set the surround back speaker to "1spkr" or "2spkrs" at
"Speaker Configuration" (
(2) For 2-channel sources
• OFF: Not played.
• ON: Surround channel signal played.
Can also be operated using < SURROUND BACK > .
5
Example: Dolby Digital
Basic Operation
x Music mode, surround back
page 56, 57)
Example: DTS