Setting The Mic Input Select; Check The Parameter - Denon AVR-2807 Operating Instructions Manual

Advanced Setup – Part 2

Setting the MIC Input Select

Sets whether the setup microphone is connected to the pin jack
(V. AUX L channel) or mini jack (SETUP MIC).
1 D D H H
Press to select "Mic Input Select", then press
ENTER
.
2
F F G G
Press to set.
Mic:
Select this to use the included microphone.
Normally set to this setting.
V.Aux L:
Select this when using a microphone other than the one
included.
3
ENTER
Press .
1
2

Check the parameter

1 D D H H
Press to select "Parameter Check", then
ENTER
press .
2 D D H H
Press to select the item, then press
For instructions on checking the results of each item (
page 12).
3 D D H H
Press to select "EQ Parameter Check", then
ENTER
press .
4 D D H H
Press to select the type of equalizer, then
ENTER
press .
5 F F G G
Press to select the speaker.
The display is only an approximate picture of the response
and that correction is happening at all frequencies.
1
2
3
4
5
61
• To reset:
Press D D H H to select "Restore" at the "Parameter Check"
screen, then press F F .
ENTER
.
Advanced Setup – Part 2