Playing The Ipod; Listening To Music; Viewing Still Pictures And Videos (Only For Ipods Equipped With The Slideshow / Video Function); Disconnecting The Ipod - Denon AVR-2807 Operating Instructions Manual

Advanced Operation
®

Playing the iPod

The music recorded on the iPod can be played when using a
DENON original Control Dock for iPod (ASD-1R). The iPod can be
controlled using the buttons on the main unit and the remote
iPod is a trademark of Apple Computer, Inc.,
registered in the U.S. and other countries.
With the iPod, non-copyrighted contents and contents that
may be legally reproduced or played may be reproduced and
played by individuals for their personal use. Violating
copyrights is prohibited by law.
1
Connect the AVR-2807 and iPod using the
DENON original Control Dock for iPod (
21).
2
Assign the input terminal at "Setting the iPod
Assignment" ( page 47).
3
FUNCTION
Use to select the function assigned in
step 2.
If the screens above are not displayed, the iPod may not be
properly connected. Check the connections and settings.
• The optional standard Control Dock for iPod is DENON ASD-1R
sold separately.
NOTE:
• DENON will accept no responsibility whatsoever for loss or
damage of data on an iPod occurring when the iPod is used
connected to the AVR-2807.
• Some of the functions may not operate, depending on the
type of iPod and the software version.

Listening to music

1 D D H H
Press
ENTER
or
Press F F to return to the music menu screen.
2
ENTER
Press
• Playback starts.
Pause:
Press ENTER during playback.
Press again to resume.
Manual search:
Press and hold in D D H H during playback.
page
• D D : Fast reverse
• H H : Fast forward
Track search:
Press D D H H during playback.
• D D : Move to beginning of previous track
• H H : Move to beginning of next track
Stop:
Press ENTER for at least 2 seconds during playback.
Repeat play:
Press [MODE].
The mode switches as follows each time [MODE] is pressed.
• RPT One: Single track repeat
• RPT All : All track repeat
Shuffle play:
Press [MEMORY].
(iPod screen)
The mode switches as follows each time [MEMORY] is
pressed.
• SFL Songs : Single track shuffle
• SFL Albums: Album shuffle
The mode switches between the Browse mode and the
Remote mode if [MODE] is pressed for at least 2 seconds.
In the Remote mode, only D D H H F F G G and ENTER can be used.
to select the music file, then press
G G
.
G G
or .
39
• When < STATUS > is pressed during playback, the front panel
display switches between the title name, artist name and
album name.
• Depending on the iPod's software version, it may not be
possible to operate the iPod from the AVR-2807. Use the latest
version of the software. Information on the latest version of the
software can be obtained on the Apple Computer website.
• If you do not want the on screen display to be displayed while
playing the iPod, set "Function/Mode Status" at "Setting the
On Screen Display" to "OFF" ( page 52).
• With the AVR-2807 it is possible to display folder names and file
names on the screen like titles. The AVR-2807 can display up to
64 characters, consisting of numbers, capital letters and small
letters. A "?" mark is displayed in place of non-compatible
characters.
Viewing still pictures and videos
(only for iPods equipped with the slideshow /
video function)
Use this procedure to view photo and video data stored on the
iPod on a monitor.
1
[MODE]
Press for at least 2 seconds to switch
from the Browse mode to the Remote mode.
• "Remote iPod" is displayed on the AVR-2807's display.
2
Watching the iPod's screen, press
"Photos" or "Video", then press
• The iPod's photo and video data are displayed on the
monitor.
• To output photo or video data recorded on the iPod to the
monitor, the iPod's "TV Out" setting (under "Video Settings")
must be set to "ON".
For details, refer to the iPod's operating instructions.

Disconnecting the iPod

< ON/STANDBY >
Press and set the AVR-2807's
power to the standby mode.
The iPod can be disconnected after switching to a function
other than the one to which the iPod input is assigned.
Advanced Operation
D D H H
to select
G G
ENTER
or .