Setting Hold Functions; Hold - Omron ZX-GT User Manual

Setting Hold Functions

Set hold conditions for measured values. The hold functions hold data for specific points,
such as the minimum or maximum value, during the sampling period (sampling time), and
output those values at the end of the sampling period.

Hold

Setting value
OFF
P-H (Peak hold)
B-H (Bottom hold)
SMPLE (Sample hold)
ZX-GT User's Manual
Description
Hold measurement is not performed. The measured value is output
at all times. (default value)
The maximum value is held during the sampling period. The output
changes at the end of the sampling period, and is held until the end
of the next sampling period.
Current
measured value
Sampling period
The minimum value is held during the sampling period. The output
changes at the end of the sampling period, and is held until the end
of the next sampling period.
Current
measured value
Sampling period
The measured value is held at the start of the sampling period. The
output changes at the start of the sampling period and is held until
the start of the next sampling period.
Current
measured value
Sampling period
Output
Maximum
value
Minimum
value
Output
Output
Setting Hold Functions
73