Omron ZX-GT User Manual page 127

< Response format >
When processing ends successfully
• When one Controller or a channel No. is specified
C R
Measured value (max. 6 digits)
• When all channels are specified
,
CH1 CH2
When processing fails
E R C R
In the IC lead pitch or IC lead width judgment modes
When processing ends successfully
• When one Controller or a channel No. is specified
C R
Judgment result
• When all channels are specified
, , C R
Judgment result
CH1 CH2 CH3
When processing fails
E R C R
< Explanation of parameters >
Channel No.
Measured value/
judgment result
ZX-GT User's Manual
,
CH3
Specifies the channel No. to prefix the command when two or more
Controllers are connected to each other. (Default is channel 1.)
01 to 03: Individual channels
99: All channels
The acquired measured value/judgment result is returned.
Measured value: -19999 to 59999
Judgment result: P, N
Configuration of measured value data p.104
C R
Measured value (max. 6 digits)
125
RS-232C