Hysteresis
Set the hysteresis width (difference between operation point and return point) for the
upper and lower limits of the judgments if the HIGH, PASS, or LOW judgment is unstable
near the threshold values.
HIGH threshold
Measured value
LOW threshold
ON
HIGH
OFF
ON
PASS
OFF
Output
ON
LOW
OFF
Setting value
00.000 to 59.999 (mm)
1
Select the hysteresis setting.
Select [HYS].
Confirm the selection.
2
Change the current value.
The sub-display flashes.
Move from one digit to another.
Change the current value.
Confirm the selection.
ZX-GT User's Manual
Hysteresis
Description
Sets the hysteresis width. (default value: 00.100)
Operation point
Return point
SUB
Setting Output Conditions
67