Omron ZX-GT User Manual page 122

Set/Acquire IC Lead Pitch/IC Lead Width Standard Values < REF command >
This command is active only when the measurement mode is the IC lead pitch or IC lead
width judgment mode.
Setting standard values
Sets the IC lead pitch/IC lead width standard values.
< Command format >
R E F
< Response format >
When processing ends successfully
C R
O K
When processing fails
C R
E R
< Explanation of parameters >
Standard values
120
RS-232C
C R
Standard values (max. 6 digits)
Specifies the IC lead pitch/IC lead width standard values.
• IC lead pitch judgment mode (600 to 28000)
• IC lead width judgment mode (300 to 28000)
ZX-GT User's Manual