Displaying And Exiting The System Menu; Displaying The System Menu - Omron NS-RUNTIME - SOFTWARE User Manual

5-1 Displaying and Exiting the System Menu

5-1 Displaying and Exiting the System Menu

This section describes methods for displaying and exiting the system menu.
5-1-1

Displaying the System Menu

The System Menu can be displayed by double-clicking one of the four corners (Range of 50
dots x 50 dots) of the main window. It will be displayed at 100 dots x 100 dots from the top
left of the main window. For the second time or more, the system menu will be displayed at
the position where it was previously displayed. While $SB3 is ON, the system menu will not
be displayed.
The system menu will be displayed by clicking twice any of the four corners.
5-2
50dots
50dots
100dots
NS-Runtime
100dots
System Menu
Main Window