Monitoring 1 Channel - Omron WD30-ME Operation Manual

Wireless Channel Monitor
1,2,3...
8-4-2

Monitoring 1 channel

1,2,3...
1. Click the "Start Logging" button.
2. The following window is displayed.
Set the "Term", "Internal", "Filename", and "Save Folder", and then click
the "OK" button.
Logging will then begin.
The setting values and initial values are as shown below.
Interval (Logging interval)
Term (Logging term)
File name
Save Folder
3. Click the "Stop Logging" button to stop logging.
4. The following message will be displayed. Click "Yes" to stop logging.
1. Click the "One Channel Mode" button in the "Channel Monitor" window.
2. The following window will be displayed.
Select the channel you want to monitor, and click the "OK" button.
3. A graph indicating the temporal variations in the transmission level of the
selected channel begins to appear.
Possible setting values
5, 10, 30, 60 (seconds)
1, 7, 15, 30 (days)
File names possible with
Windows
Directory names possible
with Windows
Section 8-4
Initial values
5 (seconds)
1 (days)
Ch_log##
## is the number in the
save directory.
C:\Program Files \Omron
\CompoBus/D \Configura-
tor
(When the DeviceNet con-
figurator is installed in
default installation direc-
tory)
119