Reading The Number Of In Points - Omron WD30-ME Operation Manual

List of Explicit Messages Addressed to DeviceNet Wireless Master Station
Response format
Parameter details
7-2-6

Reading the number of IN points

Command format
Response format
Parameter details
00
02 00
No. of received bytes
Source node address
"InstanceID" (command)
Sets WNODE:01 - 40 Hex of a specified wireless slave station.
"Data" (command)
Sets the IN points (512 points (32 words) at maximum) as follows. The data
consists of 1-byte character codes.
D7 D6 D5 D4
0 IN points (no. of channels)
0
Reads the number of IN points of a specified wireless slave station.
00 00 A8
0E
ClassID
ServiceCode
Destination node address
00
03 00
No. of received bytes
ServiceCode
Source node address
"InstanceID" (command)
Sets WNODE:01 - 40 Hex of a specified wireless slave station.
"Data" (response)
The read IN points (512 points (32 words) at maximum) are stored as follows.
The data consists of 1-byte character codes.
D7 D6 D5 D4
IN points (no. of channels)
0 0
90
ServiceCode
D3 D2 D1 D0
6D
InstanceID
AttributeID
8E
Data
D3 D2 D1 D0
Section 7-2
93