Procedures - Omron SYSDRIVE 3G3JV Setup Manual

Preparing for Operation and Monitoring
n64: Motor rated slip
n65: Motor no-load current

2-2-3 Procedures

Changing Parameters
The setting of n01 is changed so that n76 and n77 can be displayed.
D Setting n01 (Parameter Write-prohibit Selection/Parameter Initialization Parameter)
Key Indicator
---
After about 1 s
2-10
Display
(Display after the power supply is turned ON.)
Press the Mode Key until the PRGM indicator lights.
Confirm that n01 is displayed on the data display.
Press the Enter Key.
The setting of the specified parameter number will be
displayed.
Press the Increment Key until 4 is displayed. (The display will
flash.)
Press the Enter Key to confirm the setting. (The display will
stop flashing.)
The display of the parameter number will return in about 1 s.
Chapter 2
Description