Omron SYSDRIVE 3G3JV Setup Manual page 53

List of Parameters
Param- Name
eter
No.
(Regis-
ter No.
(Hex))
n40 Multi-func-
tion output
(0128)
( (MA/MB
C
and MC
output ter output ter-
minals)
n41 Frequency
reference
(0129)
gain
n42 Frequency
reference
(012A)
bias
n43 Analog fre-
quency
(012B)
reference
time
n44 Analog
monitor
(012C)
output
n45 Analog
monitor
(012D)
output gain
Description
13 Inverter ON: Inverter ready to op-
ready erate (with no fault de-
tected)
14 Fault retry ON: Fault retry
15 UV in prog- ON: Undervoltage being
ress monitored
16 Rotating in ON: Rotating in reverse
reverse direction
direction
17 Speed ON: Speed search in
search in progress
progress
18 Data output The inverter operates
via commu- multi-function output ter-
nications minals independently.
Used to the input characteristics of analog fre-
quency references.
Gain: The frequency of maximum analog input
(10 V or 20 mA) in percentage based on the (10 V or 20 mA) in percentage based on the
maximum frequency as 100%.
Bias: The frequency of minimum analog input
(0 V or 0 or 4 mA) in percentage based on the
maximum frequency as 100%.
Used to set the digital filter with a first-order
lag for analog frequency references to be in-
put.
Used to set the output frequency or current as
a monitored item.
0: Output frequency (10-V output at max. fre-
quency with n45 set to 1.00).
1: Output current (10-V output with Inverter
rated output current with n45 set to 1.00)
Used to set the output characteristics of ana-
log monitor output.
Chapter 3
Set- Default Changes
ting setting during
range opera-
tion
0 to 7, 1 No
10 to
18
0 to 100 Yes
255
–99 to 0 Yes
99
0.00 0.10 No
to
2.00
0, 1 0 No
0.00 1.00 Yes
to
2.00
Memo
3-13