Omron SYSDRIVE 3G3JV Setup Manual page 34

Preparing for Operation and Monitoring
H Example of Multi-function Display
Key sequence Indicator
D Status Monitor
Item Display
U01 Frequency
reference
U02 Output frequency
U03 Output current
U04 Output voltage
U05 DC bus voltage
U06 Input terminal p
status
U07 Output terminal p
status
U09 Error log (most g (
recent one) )
U10 Software No.
U15 Receive data error
2-6
Display
Power On
Press the Mode Key repeatedly until the MNTR
indicator is lit.
U01 will be displayed.
Use the Increment or Decrement Key to select the
monitor item to be displayed.
Press the Enter Key so that the data of the selected
monitor item will be displayed.
The monitor number display will appear again by
pressing the Mode Key.
Display
unit
Hz Monitors the frequency reference. (Same as FREF)
Hz Monitors the output frequency. (Same as FOUT)
A Monitors the output current. (Same as IOUT)
V Monitors the internal output voltage reference value of the
Inverter.
V Monitors the DC voltage of the internal main circuit of the
Inverter.
--- Shows the ON/OFF status of inputs.
Not
used
---
Shows the ON/OFF status of outputs.
Not
used
--- Displays the latest error.
--- OMRON use only.
--- The cause of the receive data error during MEMOBUS
communications can be checked. (Same as the contents of
communications register number 003DM.)
Explanation
Function
: Input ON
Terminal S1: Forward/Stop
Terminal S2: Multi-function input 1 (S2)
Terminal S3: Multi-function input 2 (S3)
Terminal S4: Multi-function input 3 (S4)
Terminal S5: Multi-function input 4 (S5)
: Closed
Terminal MA: Multi-function contact
output
Error
Chapter 2
: No input
: Open