3-4 Settings and Adjustments
3-4-1
System Settings
Select the Video Tab from the System Setting Dialog Box.
No.
Item
(1)
Video Board
(2)
Color which fills
blank channels
(3)
Video Input
Method
(4)
Save in a file
Selects the type of video board mounted on the PT.
Changing this setting changes the current project. If the
NS15 is set as the PT model, only the NS-CA002 Video
Input Unit can be used (the video board setting cannot be
changed).
Selects the color that is used to display video images with
the NS-CA002 RGB and Video Input Unit installed.
Selects the video signal input method. The setting is the
same for all video board inputs.
Sets the action to perform if the Memory Card is full when
you save a file with an image captured by system memory
bit.
Update: Deletes the oldest file before saving the current file.
Stop:
File will not be saved.
3-4 Settings and Adjustments
(1)
(2)
(3)
(4)
Contents
3-19