Table of Contents
Advertisement
3-1 Display
Blank Channel Fill-in Color
The blank channel fill-in color is one that is replaced by an image to display video
images on a PT screen. The color is transparent to video images on the screen.
When a blank channel fill-in color is selected for functional and other objects
(excluding video display objects), the area with the blank channel fill-in color
becomes transparent and video images show through the color. The part above the
display area shows video images and the part outside the display area is black.
If a rectangle is placed on the screen and the blank channel fill-in color selected for
the rectangle is the transparent color for example, then video images are displayed in
part of the rectangle.
Video display object
Select PT - System Setting on the CX-Designer, and then set the Color which fills
blank channels field from the System Setting Dialog Box that is displayed.
3-8
Select the same
Figure (rectangle)
color for the
rectangle fill and
the transparent
color.
Video images show through
the part overlapping the
image. The area outside the
video image is black.
Advertisement
Table of Contents
