Table of Contents
Advertisement
● Image Quality Adjustments and Console Output Methods
No.
Item
(1)
Display area
(2)
Image
adjustments
(3)
Video Input
Method
(4)
Video Display
Mode
(5)
Display Channel
Displays images from a video camera or Vision Sensor
connected to the channel 1 or channel 2 video input connector
on the RGB and Video Input Unit.
Use the Select Input ch field to switch the channel that is
displayed. The area turns blue if data is not input to the
channel currently being displayed.
Adjusts the quality of the image from the selected video input
connector channel on the RGB and Video Input Unit. The
contrast, brightness, shade, and tone of the image can be
adjusted by clicking the buttons.
The adjustments are as follows:
<<: -10
<: -1
>: +1
>>: +10
Selects the method used to input image signals from the video
input connectors on the RGB and Video Input Unit.
Select the video display mode. Normally leave this mode set to
Stdrd. If the display is not clear, change the setting to the one
that produces the clearest display.
Selects the input channel on the RGB and Video Input Unit
that will be adjusted.
1 ch: Video input connector channel 1
2 ch: Video input connector channel 2
RGB: Analog RGB input connector (RGB Configuration is
accessed.)
3-4 Settings and Adjustments
Contents
(1)
(6)
(2)
(3)
(4)
(5)
(7)
3-21
Advertisement
Table of Contents
