System Configuration - Omron NS - MANUAL 2 Operation Manual

1-2 System Configuration

A system configuration using the RGB and Video Input Unit is shown below.
RS-232C cable
(15 m max.)
RS-422A cable
(500 m max.)
RS-232C/422A Adapter
Ethernet cable
NS-series PT
The RGB and Video Input Unit (NS-CA002) operates only when installed on
Note
the models in the Applicable column of the following table. Do not install it on
any other PT.
Applicable
NS15-TX01@-V2 *
NS12-TS0@(B)-V1/-V2
NS10-TV0@(B)-V1/-V2
NS8-TV@@(B)-V1/-V2
* There are restrictions in installing an NS-CA002 RGB/Video Input Unit on an NS15 V2 PT. Refer to
1-3 Restrictions in Installing an NS-CA002 RGB/Video Input Unit on an NS15 PT for details
RGB cable
Host
RGB and Video Input Unit
Personal computer running Windows
NS12-TS0@(B)
NS10-TV0@(B)
NS7-SV0@(B)
NS5-SQ@@(B)-V1/-V2
NS5-TQ@@(B)-V2
NS5-MQ@@(B)-V2
NSJ12-TS0@(B)
NSJ10-TV0@(B)
NSJ8-TV0@(B)
NSJ5-SQ@@(B)
NSJ5-TQ@@(B)
NSH5-SQ@@B-V2
1-2 System Configuration
Personal computer
Video camera or
Vision Sensor
NTSC/PAL
cable
Not applicable
CX-Designer
1-3