Omron NS - MANUAL 2 Operation Manual page 43

When the Video Board Field Setting Changes
The following changes will be made to screen data that is being edited when the
Video Board field is changed.
Switching from an NS-CA001 Video Input Unit to an NS-CA002 RGB and
Video Input Unit
Component
Video display Comments
Display size
Split screen
designation
Select Input ch
Frame
Start Point of
Video Display
Frame
Space line
setting
Position from the
Upper Left of
Screen
Command -
buttons/
Multifunction
Objects
Properties
No change.
800 x 600: Changes to 640 x 480.
Position from upper left side of screen is set to (0, 0).
• 640 x 480: No change.
• 320 x 240: Changes to 320 x 240 with no split
Changes to no split screen.
Channel 1 or 2: No change.
Channel 3 or 4: Changes to channel 1
Changes to no frame.
The following changes are made depending on the
display size after the setting was changed.
• 640 x 480: dot position = 33, line position = 1
• 320 x 240: dot position = 16, line position = 1
No change.
The following changes are made depending on the
display size before the setting was changed.
• 800 x 600: X coordinate = 0, Y coordinate = 0
• 640 x 480: No change.
• 320 x 240: Changes the display position to that of
No change.
Changes
screen. Changes the display position
to that of the smallest input channel
number displayed.
the smallest input channel number
displayed.
3-1 Display
3-13