Table of Contents
Advertisement
• The RGB display may be distorted or text may be blurred for some input
Reference
• If the polarity of the sync signal is reversed in comparison to the input
RGB Configuration by Command Buttons
RGB image gain can be adjusted using command buttons or Multifunction Objects.
The following example is for command buttons.
No.
Item
(1)
Red
(2)
Green
(3)
Blue
devices. If this occurs, try adjusting the display with the phase level
buttons. (This may not correct the problem for some input devices.)
signal, RGB display screens may appear dark. If this occurs, the
polarity can be corrected to produce a proper display by switching the
screen once.
Setting items: −10, −1, +1, +10
Adjustable in 256 steps.
Setting items: −10, −1, +1, +10
Adjustable in 256 steps.
Setting items: −10, −1, +1, +10
Adjustable in 256 steps.
3-4 Settings and Adjustments
Contents
(1)
(2)
(3)
3-27
Advertisement
Table of Contents
