Omron NS - MANUAL 2 Operation Manual page 33

Procedure for Displaying Video Images
1. Mount the RGB and video board on an NS-V1/-V2 PT.
Follow the procedure for installing the RGB and Video Input Unit on the back of
the PT. Refer to 2-3 Installing the RGB and Video Input Unit for details.
2. Connect a video camera, Vision Sensor, or other input device to a video input
connector.
Connect the input device to the video input connector on the RGB and Video
Input Unit. Refer to 2-4 Connecting Video Input Connectors for details.
3. Create a project.
Use the CX-Designer to create the RGB and Video Input Unit project.
• Creating New Projects
Set the System Version field to 5.1 or later in the New Project Dialog Box.
• Opening Existing Projects
A project with screen data that was edited or saved using CX-Designer Ver. 5.0 or
earlier must be converted to System Ver. 5.1 or later. Select version 5.1 or latter
under the Tools – Convert – Version Menu.
4. Set system settings from CX-Designer.
(1) Select PT – System Setting on the CX-Designer.
(2) Select the Video Tab from the System Setting Dialog Box.
(3) Set the Video Board field to RGB/Video Input Unit with 2 channels
(NS-CA002), and click the OK Button.
Observe the following precautions when changing the Video Board field
Reference
setting.
If the Video Board field is changed with a video display object already
on the screen, the control object on the screen will be converted or will
be deleted.
Check to see if all video display objects and Command Buttons in the
project operate correctly with the Video Input Unit you selected when
you changed the Video Board field setting.
Refer to 3-1-3 Changing the Video Board Field Setting for details.
3-1 Display
3-3