Table of Contents
Advertisement
3-2 Video Capture
Reference
Executing with a Multifunction Object
Select Video Control - Video Capture for the Object Control field of the Multifunction
Object properties. Then specify the name of the BMP file to save. The operation is the
same as that for command buttons.
3-16
• When you change the Video Board field setting from System
Settings, the Command Button may not capture video images
because the video display settings have changed. Always review the
Command Button settings after you change the Video Board field
setting.
• Operation will be as follows when the If Memory Card is full property
is set to Update and the Memory Card is full when you save a
captured video image:
1.
The size of the current file is compared to the size of the oldest
file. If the current file is smaller, then the oldest file will be deleted
and the current file will be saved.
2.
If the current file is larger than the oldest file, then the second
oldest file will be added and the size of the two files will be
compared to the current file. If the oldest and second oldest files
together are larger than the current file, then the two oldest files
will be deleted and the new file will be saved.
3.
If space cannot be secured according to the rules above, the
files in the Memory Card will remain unchanged and an error
message will be displayed.
• RGB display images cannot be accepted
• When a video image is captured, a file with the same name as the
captured image file and an extension of .mng will be created in the
log folder (\LOG) under the Memory Card directory. These files are
used to manage numbers for file names. Do not edit or delete these
files.
Advertisement
Table of Contents
