Table of Contents
Advertisement
3-4 Settings and Adjustments
No.
(6)
(7)
Reference
Video Configuration by Command Buttons
Image adjustments (contrast, brightness, shade, and tone) can be performed using
command buttons or Multifunction Objects. The following example is for command
buttons.
3-22
Item
Vision Sensor
Console
Outputs
Write
• If SHIFT is attached to other control signals and sent to an OMRON
Vision Sensor, press another signal button while pressing the SHIFT
button. When attaching the SHIFT signal with the NS15, however,
press the SHIFT button once to turn it ON and then press another
button, and then press the SHIFT button again to turn it OFF.
• The operation of the SHIFT button is different between the NS15 and
other PTs.
• NS15: The ON/OFF status will change each time the command
button is pressed.
• Other PTs: The command button will be ON while it is pressed
and will turn OFF when it is released.
Contents
Click these buttons to send control signals to an
OMRON Vision Sensor connected to the console
output connector on the RGB and Video Input
Unit.
Refer to the Vision Sensor manual for details on
individual button functions.
Function keys (F1 to F9) are available only with
Command Buttons.
Saves image quality adjustments. Previous
settings will remain if the PT is restarted without
clicking the Write Button.
Advertisement
Table of Contents
